Go Back
Print

Ruby Red Ale

This easy-drinking brown beer bring many toffee and caramel flavours with the medium-toasted malts.  Finish with 30g of local or English hops for that old-school pub pint experience. Brew to 23L 4.3% ABV; Colour, ruby-red, 33 EBC; Bitterness, low-medium 20 IBU.
Prep Time40 minutes
Active Time10 days
Course: Drinks
Keyword: Brick Road, Home Brew Beer, Ruby Red Ale
Cost: 35

Equipment

  • 1 30 litre fermenter
  • 1 Large mixing spoon
  • 1 5 litre jug
  • 1 Cup

Materials

  • 1.8 kg Brick Road Craft Imperial Porter kit
  • 1.5 kg Brick Road Dark Malt
  • 1 kg Brick Road Dark DME
  • 30 g East Kent Holdings or local hops Optional
  • 1 pkt Fermentis US-05

Instructions

  • Clean and sanitise fermenter, spoon, cup and jug.
  • Fill the cup to 3/4 full with cold brewing water. Sprinkle in the dried yeast and gently stir in for 30 seconds. Cover.
  • Soften the malt cans in hot water for about 5 minutes.
  • Pour 2 litres of boiling water into your 5L jug. Open the cans and pour the contents into the jug.
  • Mix the concentrated wort and water well, then pour into your fermenter. Top up with cold quality brewing water to 23L for approx. 4.3% ABV. Stir in the DME. Vigourously stir the wort with a large spoon to oxygenate it. Ensure the wort temperature is 16-25 degrees Celcius. Gently pour in the cup of yeast slurry and gently stir into the oxygenated wort.
  • Seal the fermenter lid and insert airlock. Ideally ferment at 18-24 degrees Celcius for 10 - 14 days.
  • Dry hop at 5 days. Ideally use a hop bag, immerse in the wort and remove after 48 hours.
  • After 10-14 days, check the gravity. If the SG remains steady for three days, fermentation is complete. If in doubt, leave a few more days for better results. Keg or bottle your brew.
  • NOTE: For WilliamsWarn and pressure brewing systems, follow the fermenting instructions for an Ale yeast recipe.